SL-003A Overhead Ionizer Anti Static Eliminator Ionizing Blower

• Certification: RoHS, ISO, CE
• Condition: New
• Waterproof: Non-Waterproof
• Type: Ionizing Air Blower
• Material: Metal
• Usage: SMT Production Line, Printing Workshop, Computer Room, Electronic Component Maintenance Room, Combustible & Explosive Area
• Model NO.: E-3000N
• Transport Package: 69*30*42cm 2PCS/CTN 14kg/CTN
• Specification: 600mm*170mm*125mm
• Trademark: IONSTAT
• Origin: China
• HS Code: 8543709990
• Production Capacity: 10000PC

Product Description

ESD Protection Overhead 3-Fan Ion blower Static Eliminator

Product Description

 

Overhead air ionizer E-3000N for Industrial static electricity elimination, with high performance ionizing electrode,could quickly eliminate static electricity on the charged subject, Preventing the degradation of liquid crystals and electronic components. The product is lightweight, compact and can be placed overhead or desktop in the working place.

Features:

1. Eliminate static electricity very quickly
2. Has three Ion fans , Ion airflow covers large area
3. Ion balance blow ±10V
4. Built-in electrostatic pin cleaning brush
5. Fan speed is continuously adjustable
6. Has working indication light.
7. Has two lamps to illuminate working place
8. Overall size: L600*W170*H125mm

Product Parameters

 

SPECIFICATION

Line Voltage                 220VAC/ 50 Hz or 110VAC / 60Hz

Air Volume Output            Fan speed Flow
Low 120 CFM
High 330 CFM
Operating Temperature        -10ºC~+45ºC
Enclosure                     Aluminum

Finish                        Powder Coat

Size                      600mm(L)×170mm(W)×120mm(H)
Ion Balance(offset voltage)   0V+/-10V(It requires no calibration)
Weight:                   5.2kg

Installation Instructions

 

INSTALLATION
The SL-003A Ionizing blower should be located 600 to 900mm above work surface with center fan directly above critical area. There should be no cross flow of air between unit and work surface. Drafts from air conditioning or heating air outlets can affect the performance of this device.

1  Mounting
The SL-003A unit may be mounted using adjustable mounting brackets. The mounting brackets are designed for use on a variety of surfaces such as: perforated steel angle, uninstructed metal framing and on Metro wire shelving. Place a lock washer and flat washer on the lock knobs and secure the device using center holes on mounting tab. Be sure to install fiber washer.

The S hooks provide for chain mounting or mounting on wire shelving. Install overhead blower by using outer holes on mounting tabs. Chains and mounting hardware (not supplied) must have a minimum safe working load of 15kg.

2  Electrical
The SL-003A requires 220VAC/50Hz or 110VAC/60Hz for proper operation. The device must be grounded for safe operation. The device comes with line cord, without plug. A plug must be installed on the line cord for operation. Installation of the plug must be performed by qualified personnel. The color cord for wiring the plug is as follows: Red-line; Blue-Neutral; Green/Yellow-Ground.

OPERATION
Activate the SL-003A Overhead Ionizing Air Blower by turning FAN SPEED knob clockwise, out of the off position. The IONIZATION INDICATOR will illuminate to indicate the presence of ionized air. Set airflow as lights desired by adjusting FAN SPEED knob. If light is desired, turn on task by setting LIGHTS switch to the on (1) position. TO clean ion emitter points, rotate POINT CLEANER knob at each air outlet clockwise to the stop slightly (approximately one turn) and release.

The time required to neutralize a static charge on an item in the air stream depends on fan speed. Setting a higher fan speed reduces time required to neutralize a static charge.

When the SL-003A blower is used in an electronic assembly area, the ionized air stream should cover as much of the working area as possible.  The constant flow of ionized air will prevent items such as work surfaces, tools, materials and components from developing a static charge. Charged items introduced into a work area will be neutralized and will remain neutral while keeping in the ionized air stream.

The SL-003A overhead blower has been designed for minimal maintenance. The only regular maintenance suggested consists of emitter point cleaning, ion balance checking and ion output checking. Emitter point cleaning takes only moments with the point cleaners. The SL-003A also contains a balancing circuit that is inherently self balancing. This circuit compensates for emitter point wear, line voltage fluctuations and variations in air velocity.

Scheduled checking of ion output and balance should be considered to assure quality audit requirements.

MAINTENANCE
1 Emitter Cleaning
To clean ion emitter points, simply rotate point cleaner knob located at center of each outlet clockwise to the stop (approximately one turn) and release. The spring-loaded point cleaning brush will return to its home position. Recommended frequency of cleaning is once a week.

2 Air Inlet and Outlet Cleaning
The air inlet grilles on the top of the unit and ionized air outlets should remain clean to prevent restriction of airflow. They can be cleaned with a soft brush or vacuum.

3 Ion Output Check
Use a charged plate monitor to test the unit for ion output. Discharge times should be measured and checked against the following Ion Output tables.

ION OUTPUT (DISCHARGE TIME):
 

Testing condition	Temperature 22ºC±5ºC	RH: ≤60%
	Distance: 300mm
Decay time	positive	1.1s
	negative	1.2s
Offset voltage	-10V-+10V

1. Distance measured in mm, decay time measured in seconds.