Desk-Top Sensor Anti-Static Ionizing ESD Blower Nozzle Air Ionizer

• Customization: Available
• Certification: CE, ISO, RoHS
• Usage: Combustible & Explosive Area, Computer Room, Electronic Component Maintenance Room, Printing Workshop, SMT Production Line
• Model NO.: E-DNS06
• Sensor: Yes
• Timer: Yes
• Offset: Less Than +-30V
• Decay Time: Less Than 2.0s at 300mm
• Transport Package: Paper Carton
• Specification: 200*150*105mm
• Trademark: ECW
• Origin: China
• HS Code: 8543709990
• Production Capacity: 5000PC

Product Description

Desk-Top Sensor Anti-static Ionizing Nozzle Air Ionizer ESD Blower
E-DNS06 Ionizer is a benchtop hand free air nozzle static charge eliminator. Operator can twist and adjust the height and angle of metal tube to target a specific area or object. It is equipped with a High Voltage device. Airflow and electric power of the device can be controlled by the foot switch or optical sensor switch, which are attached to the device. 

Features
1, Elimination time setting function, help to standardize static electricity eliminating process on the assembly line.
2, With inherent protection device, Even high voltage supply output terminal short-circuited, it will not burn.extremely protecting the safety of working places.
3, With good load characteristics, stable output voltage, and when output capacitance is below 2000 PF,  the output voltage could be very stable(< 8%), so it is suitable for static eliminators with capacitively resistive loads (such as shielded cable connections).
4, Less output voltage waveform distortion .
5, When the compressed gas also enters the high pressure supply, and the output of the gas and electricity can be controlled at the same time.

Specification
Operating Voltage: 220V
Power Consumption: Max. 35VA
Operating Temperature: -10°C ~ +45°C
Operating Air Pressure: 0.3MPa ~ 0.8MPa
Air Velocity: 10m/sec
High Pressure Air Consumption: Approximately 3m3/hour
Weight: Approximately 4.3kg

Testing Condition		Voltage: 1.0kv ~ 100v, -1.0kv ~ 100v
		Temperature: 22ºC, RH: ≤60%
Distance		150mm
Decay time	Positive +	1.3s
	Negative -	1.5s
Ion Balance	Positive +	-50v ~ +50v
	Negative -

  
Time setting
1,When the set number is 00S00/00M00/00H00,the timing function is off, the power supply works only according to the command of sensor.
2,When the set number is 05S00,the power supply works 5 seconds, it will be off asthmatically until time is over. The ionizer senses another products, the power supply starts to work again.
3, Please set ionizing time in accord with the production requirement.