1175*575*320mm High Quality DC Fan Filter Unit FFU

• Certification: CCC, RoHS, ISO, CE
• Condition: New
• Waterproof: Non-Waterproof
• Type: FFU
• Material: Metal
• Usage: SMT Production Line, Printing Workshop, Computer Room, Electronic Component Maintenance Room, Combustible & Explosive Area
• Model NO.: EFFU-NALT558
• Specification: 1175*575*190
• Trademark: ECW
• Origin: China
• Production Capacity: 10000PC

Product Description

China FFU-1175*575*320(Fan filter unit)
 

Product Description

 

The fan draws in air from the top of the FFU and filters it through HEPA filter. The filtered clean air is evenly sent out at the wind speed of 0.45m / s ± 20% over the entire outlet surface. Widely used in semiconductor, LCD manufacturing, electronics, biopharmaceutical and other industries.
Use environment
Ambient temperature: 5 ºC ~ 40 ºC
Humidity: less than 85% RH (without moisture condensation)
Ambient air: general indoor air
Clarity: 100-10
Please avoid continuous ON / OFF operation of the machine body
Specifications:

1. The overall length, width and height of the cabinet are 1174mm*574mm*260mm
2. The box structure is fully disassembled for easy maintenance (fan, motor, controller)
3. The box material is galvanized 0.8mm
4. Power: AC 1Ph , 200 ~ 240V , 50/60Hz. Built-in DC-AC conversion module
5. Power wiring mode, male and female buckle extension cable
6. Wind speed 1000CMH (0.45M/sec)
7. Full static pressure, power consumption 260pa (stepless speed regulation 60-200W)
8. Controller with active PFC, stepless speed regulation (0.3~0.8M/sec)
9. Harmonic (Harmonic) THD A needs to be suppressed below 12%
10. Power factor cos Φ 0.95 or more

If the fan filter unit is used in an environment that does not meet the above conditions, it will affect the performance of the product, and electrical short-circuits may occur, causing damage to electrical components and shortening the service life of the product.

1.Split-type design for high efficiency filter and the main body of FFU, easy installation and change. 
2.Direct driven centrifugal fan, service life is up to more than 50 thousand hours 
3.Energy saving, central computer control, stable operation, low noise, digital adjustment
4.The shell can be made of mirror stainless steel or aluminum alloy, with good outlook.
5.Each FFU would be scanned by laser particle counter when out of factory, to ensure quality
6.Suitable for 10~300000 Clean room, easy to control the whole operation
7.Suitable for clean production line, could be applied separately according to the layout, and could also multiple units for 100 level assembly line.

Product Parameters

 

FFU 1175*1175*245

Module size(mm)	1175*1175*320	Power	150W
Main body material	Galvalume 0.8mm /stainless steel	Air velocity	0.45m/s±20%
Input	AC 220Vor110V/50Hz	Air volume	1000m³/h
Fan model	Internal rotor double motor+315#Aluminium alloy impeller	Noise	55dB
HEPA	1170*1170*70(H13)

FFU 1175*1175*320mm

Module size(mm)	1175*1175*320	Power	150W
Main body material	Galvalume 0.8mm /stainless steel	Air velocity	0.45m/s±20%
Input	AC 220Vor110V/50Hz	Air volume	1000m³/h
Fan model	Internal rotor  motor+500#Aluminium alloy impeller	Noise	57dB
HEPA	1170*1170*69(H13)	Pre-filter	NA