Clean Room Sole Shoes Cleaner

Product Details
Customization: Available
Transport Package: Paper Carton
Specification: 52 * 70 * 35cm
Still deciding? Get samples of US$ 1200/Piece
Request Sample
Gold Member Since 2018

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Plant Area
>2000 square meters
Management System Certification
ISO 9001
  • Clean Room Sole Shoes Cleaner
  • Clean Room Sole Shoes Cleaner
  • Clean Room Sole Shoes Cleaner
  • Clean Room Sole Shoes Cleaner
  • Clean Room Sole Shoes Cleaner
Find Similar Products

Basic Info.

Model NO.
E-V2
Trademark
IONSTAT
Origin
China
HS Code
8479899990
Production Capacity
5000PC/Month

Product Description

Clean Room Sole Shoes Cleaner

Model no. E-V2
  1. Function Introduction
The machine adopt the three side encircle type and use dust remove and suction mode design. it's cleaning the sole, shoe side and shoe upper's dust effect is perfect. Built-in vacuum cleaner can make the working machine suck the flying dust. Sole cleaning part adopt drum-type cleaning way to clean the sole more cleaning. Sole cleaning brush wheel adopt abrasion resistant, heat-resistant nylon yarn to make the structure dense arrangement, durable in use. Built-in the intelligent inductive control module running stable and credible. The structure all made from high quality stainless steel, the appearance looks very elegant. It's necessary cleaning and sterilizing equipment in the factory, office and office building. 

2 Product Description
 
  1. E-V2 is vacuum type sole cleaning machine, built in vacuum cleaner, adopt 3pcs reversible gear slowdown motor drive to cleaning the sole.
  2. The machine each brush wheel each adopt reversible gear slowdown motor to drive independently. High efficiency, maintenance more convenient, low noise. Using reliable and longer using life time.
  3. Two side obround nylon brush covers all shoe's side, remove shoe side's dust.
  4. Shoe upper cleaning polish brush is made of knitting wool.
  5. Built in the intelligent inductive control module, induction start, time delay stopping automatically (delay time 5s),operation is stable and reliable.

3 Technical Parameter
 
Type Vacuum one foot remove dust    
specification(mm) 650(L)×500(W)×350(H) Effect cleaning length  
power supply AC220
50HZ(can customize)
Absorbing part length  
power rating 620W noise ≤55DB(not including vacuum cleaner)
packing Carton(at the bottom add the tray) protection leakage,Short circuit,over loading
On-off method intellective induction,automatic time delay Time delay time 5~60s
body frame material steel Casing material steel
color Ivory white    

4. Using method
  1. Unpack the case, take out handrail, fix the handrail's ferrule in the hole of steady rest, use the 4pcs M4 screw to screw up it.
  2. Power-on(the electric outlet must have good earth jack and external conduction, or else it will make induced electricity easily) , then put the foot between the sole cleaning brush and the vamp polishing to brush, the machine will start to work automatically. And it will stop working within 10 seconds since the foot leaves the machine.
  3. Please remember to take out dust of the vacuum cleaner regularly, which is set in the back of the machine. The dust in the vacuum cleaner, you just press the button of the cleaner, you will take out the dust box to clean it.

3. Trouble Shooting
 
  1. The machine doesn't work when people put their foot onto the machine?
Open the back door and check whether the power light is on.
If the power light is on, then check whether the leakage protection switch is tripped-off or not.
If the leakage protection switch works, then check the circuit whether the fuse is blown or not.(Before checking the fuse, please close the leakage protection switch or pull the plug out, to make sure of safety)
If the fuse works too, then check the power line, check whether the plug is in or whether it has power or not.
If all the above works, that may be the circuit has problem.
 
  1. The machine doesn't stop or start to work itself without shoes under the brushes and doesn't stop working?
Check the sensor head, if the sending gives out red light that means the sending sensor head doesn't have problem.

If the sending sensor head is good, take off the receiving sensor head from the circuit, and put the backup receiving head onto the circuit, then point it to the sending head, if the machine stops working within 10 seconds, it means the receiving head is damaged.

If the sending head and the receiving head are both ok, then it means the circuit board is damaged, and it should be replaced.
 
  1. The shop polishing motor doesn't work or works slowly?
Check whether the power and the electric capacity are on or not, if they are both on, then check the motor, and etc.


Model: E-V2, Brand: ECW                  
Type: Automatic induction
Body size (CM): 52 * 70 * 35
Brushes (pcs): 3 brushes for round brushes
Motor (pcs): 3
Power (w): 1005
Net weight (kg): 55
Voltage: 110-220V 220-240V
Frequency: 50HZ.
Use environment: indoor (can be used outdoors after being covered)
Electromechanical protection level: E Noise: less than 52DB
Body material: Steel                        
With stainless steel handrail

Clean Room Sole Shoes Cleaner

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier