Et-101 Non-Contact Static Locator

• Customization: Available
• Certification: CCC, RoHS, ISO, CE
• Type: Tools
• Model NO.: ET-101
• Usage: SMT Production Line, Printing Workshop, Computer Room, Electronic Component Maintenance Room, Combustible & Explosive Area, ESD Control Places
• Condition: New
• Waterproof: Non-Waterproof
• Material: Metal
• Transport Package: 1kg
• Specification: 120mm × 70mm × 32mm
• Trademark: ECW
• Origin: China
• HS Code: 8543709990
• Production Capacity: 5000PC

Product Description

Non-contact Static Electricity Sensor Meter ET-101 is suitable for measuring the electrostatic voltage (potential) of a charged object, such as the electrostatic potential of a conductor, an insulator, and a human body. It can also measure the liquid level potential and detect the performance of anti-static products. It is widely used in the measurement of static electricity in petroleum, chemical, oil depot, fire, electronics, national defense, aerospace, natural gas, printing, textile, printing and dyeing, rubber, plastics, spraying, medicine and other scientific research, production, storage and transportation safety management departments. It is an ideal instrument for field electrostatic detection.

Specifications:
1. Intrinsically safe explosion-proof type, explosion-proof mark:ExiaIICT5.
2. Non-contact measurement. Input resistance >1016Ω.
3. Measurement range: ±0V to ±50KV.
4. Measurement error: < ± 10 %.
5. Display: 3 1/2 digit LCD display, polarity display over-range display, battery low voltage display.
6. Measurement display speed: 3 times per second
7. With reading hold function, easy to read
8. Operating environment: Temperature 0°C ~ 40 °C, relative humidity less than 80%.
9. Power supply: one 6F22 type 9V laminated battery , power consumption is less than 15mW.A battery can  generally be used for one year.
10. Meter size : 120mm × 70mm × 32mm.
11. Weight: about 0.2kg (including battery).

Measuring the surface potential of an object

Boot and clear
Turn the power switch to the ON position away from the object to be measured (preferably 1 m away from the object to be measured) or at a potential of zero (such as a grounded metal body or near the ground). The displayed value should be zero or close to zero ( The number at the end is preferably not more than 3]. If it is not zero, turn the switch back to the OFF position (clear and shutdown in the same position, push hard when pushing forward) and then dial back to the ON position.

Since the sensitivity and resolution of the digital meter are higher than that of the pointer meter, it is susceptible to the surrounding static electricity and the operator's charging. When the test button is pressed, sometimes the display is not "000" , but the measurement error can be ignored . If the measurement results are more accurate, the initial reading can be subtracted from the measurement reading.

Measurement and reading
Move the meter from far to near to a distance of 10 cm from the object being measured (calculate the measured distance from the groove at the front of the meter) and read the meter reading in KV. When the voltage of the measured object changes, the reading also changes.

Testing the anti-static performance of products

Use this meter to quickly detect the performance of some anti-static products Rubbing the surface of the textile to be tested (such as overalls, fabrics), floor, carpet, workbench, packing box, foam, plastic pipe component box with nylon or plastic film, and measuring the surface potential of the object to be inspected with ET101 explosion-proof electrostatic voltmeter. If the surface voltage is lower (or decay faster), the anti-static performance is better, otherwise the anti-static performance is not good.